Amtico High Temperature adhesive for use with Amtico LVT flooring. Suitable for all areas of the home including those with underfloor heating and rooms where the temperature will fluctuate such as conservatories. 14KG size will cover up to 60sqm.
It is solvent free, protected against biodegradation and is suitable for use over normal underfloor heating installations. For securing Amtico tiles onto sound, smooth and dry surfaces of concrete, sand/cement screed, smoothing and underlayments, plywood and many other substrates that have been suitably prepared. Asphalt and waterproof membranes and non-absorbent surfaces such as granolithic, terrazzo and quarry tiles must be prepared using a minimum of 3mm of the appropriate smoothing underlayment.
Preparation
Proper subfloor preparation is essential for the correct installation of any floor tiles. Subfloors must be sound, smooth, dry and free from any contaminants which will affect adhesion. Tiles, adhesive and subfloor should be allowed to stabilise to a constant temperature as close as practical to room temperature, but in all cases between 18°c and 27°c for a period of 24 hours before, during and after installation. Tiles must be stored flat. Damp Floors These should be allowed to dry to an acceptable level (see BS8203) or treated with a surface-applied damp proof membrane.
- SKU:
- AA120
